Facebook Twitter

EnglishGermanHindiItalian

Condenser Tubes


Condenser Tubes

Condenser Tubes with finely grooved, modified outer and internal enhancements are produced by Tube Tech for Refrigerant Condenser Applications. These tubes are manufactured with integral helical fins on the outside surface of the tube which enhance the condensing heat transfer coefficient. with finely grooved, modified outer and internal enhancements are produced by Tube Tech for Refrigerant Condenser Applications. These tubes are manufactured with integral helical fins on the outside surface of the tube which enhance the condensing heat transfer coefficient. Internal helical ridges of this enhanced condenser tube act to induce turbulent water flow and increase surface area, both of which improve heat transfer. These tubes are ideally suitable for the demanding condensing applications. These tubes are fabricated in alloy C 12200 to meet the chemical, mechanical and other test parameters of ASTM B 75 / B 359 and in alloy 70600 to meet the chemical, mechanical and other test parameters of ASTM B 111 / B 359. BS EN, JIS and DIN standards are also available on request.

  • Condenser Tubes are generally produced with internal ridges / rifles. However, smooth bore tubes may also be produced on request.
  • Condenser Tubes are generally supplied in the “as finned” condition. However, alloy 70600 can be supplied in “annealed” temper upon specific request.
  • Condenser Tubes are generally produced with desired plain ends, tubes can also be fabricated with intermediate landings upon specific request.
  • Condenser Tubes are produced in straight length up to 8 Meters. Bigger lengths can be accommodated on request.
  • Condenser Tubes are supplied with deburred / smooth ends.


End Application : Refrigerant condenser applications



Technical Specifications

Tube Dia Wall Thickness Fin Density Fin Dia Fin Depth Root Dia Wall Thickness under Fins
19.05 mm 1.47 mm 40 18.80 mm 0.71 mm 17.38 mm 0.63 mm
19.05 mm 1.32 mm 40 18.80 mm 0.71 mm 17.38 mm 0.57 mm
15.87 mm 1.32 mm 40 15.70 mm 0.71 mm 14.28 mm 0.57 mm