Facebook Twitter

EnglishGermanHindiItalian

Corrugated Fin Tube


Corrugated Fin Tube

Tube Tech produces Corrugated Fin Tubes with Internal and external spiral corrugated copper fins of 0.5 mm to 1.2 mm height which creates progressive turbulence giving a high degree of thermal conductivity. These tubes are made from thin walled smooth tubes of wall thickness as low as 0.5 mm. These tubes are fabricated by using a special process where the outer and the inner surfaces are given spiral-shaped rotating impressions which equips corrugated tube with excellent thermal properties.

The Tube diameter can range from 12.7 to 25.4 mm and wall thickness from 0.50 to 2.11 mm with corrugation pitch 3 mm to 12 mm. These tubes can be produced in Copper, Brass & Cupro Nickel Tube Material as per the requirement. These tubes are available in lengths up to 8 meters. Bigger lengths can be accommodated on request.

  • Corrugated Fin tubes with fin density other than mentioned above can be produced on request.
  • Corrugated Fin Tubes are generally supplied in the “as finned” condition. However, Brass and Cupro Nickel can be supplied in “annealed” temper upon specific request.
  • Corrugated Fin Tubes are generally produced with desired plain ends, tubes can also be fabricated with intermediate landings upon specific request.
  • Corrugated Fin Tubes are produced in straight length up to 8 Meters. Bigger lengths can be accommodated on request.
  • Corrugated Tubes are supplied with deburred / smooth ends.


End Application : Fluid to fluid & gas to gas heat exchangers, air conditioning exchangers and chiller units.